LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 745219 Removing And Installing Padding For Rear Backrest (Except MACAN Sport Edition) >> Removing Padding For Rear Backrest

Removing Padding For Rear Backrest

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Only for left rear backrest:  Remove cover for belt.
    1. 1.1. Unclip cover for belt -1-  using a plastic wedge at the rear -arrow A-  and pull it up and off -arrows B-  .
      G11982120

      Removing cover for belt 

    2. 1.2. Carefully pull cover for belt -1-  apart at the connection point -arrow C-  and guide out the belt.
  2. Pull cover for backrest lock -1-  off the backrest -2-  (-arrow-  ).
    G11982121

    Removing cover for backrest lock 

  3. Pull off cover for backrest locking mechanism -1-  in an upward direction using a suitable tool (e.g. a hook) -2-  (-arrow-  ).
    G11982122

    Removing cover on locking mechanism for backrest 

  4. Loosen cover piping -1-  all the way around (-A, B, C, D-  ) and remove it from the backrest -2-  . To do this, carefully open the retaining strip -3-  using a plastic wedge and pull out the cover piping -1-  .
    G11982123

    Loosening cover piping on rear backrest 

  5. Remove padding with cover

Information 

Detach padding from the cover and secure it, see → 745255 REPLACING PADDING FOR REAR BACKREST 

scientia non olet · About LEMON Manuals