LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 606 (74 Seat Cushions, Seat Covers -- (95B) MACAN) >> WM 741719 Removing And Installing Padding For Front Backrest (Except MACAN Sport Edition) >> Removing Padding For Front Backrest

Removing Padding For Front Backrest

WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Detach padding from the cover and secure it, see → 741755 REPLACING PADDING FOR FRONT BACKREST 

  1. Disengage cover from the cut-out for the backrest cover all the way around -arrows-  .
    G11982066

    Detaching cover from cut-out for backrest cover 

  2. Pull out fixing clips -1-  .
  3. Disengage restraining strap -1-  for the cover at the left and right.
    G11982067

    Loosening restraining strap 

  4. Unclip rear seat cover -2-  by pulling it downwards.
  5. Loosen fastening screws -3-  for ISOFIX clips -4-  .
  6. Release and disconnect electric plug connection for seat heating at the underside of the seat.
    G11982068

    Disconnecting connector for seat heating 

  7. Carefully place cover over the ends of the headrest guides.
  8. Pull padding with cover forward between the seat surface and backrest -arrow A-  .
    G11982069

    Removing padding 

  9. Remove padding with cover by pulling it upwards -arrow B-  .
scientia non olet · About LEMON Manuals