Removing Rearview Mirror
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Voltage peaks
- Risk of damage to load or to the control unit
→ Switch off ignition and remove remote control before disconnecting or removing load.
- Release electric plug connection for rear-view mirror -arrow a- and pull it off -arrow A- .
- Tie cord -1- onto the plug connection -2- .
- Press rubber sleeve -3- through wire harness -arrow- .
- Remove rubber sleeve -arrow A- .
- Unscrew rear-view mirror fastening screw -arrow B- .
- Remove rear-view mirror.
- 6.1. Press rubber sleeve into door wire harness -arrow A-
.
Access to facilitate guiding out the wire harness.
- 6.2. Lift the rear-view mirror up and off -arrow B- .
- 6.3. Pull wire harness out of the door.
- 6.4. Detach the cord (remains in the door).
- 6.1. Press rubber sleeve into door wire harness -arrow A-
.