Removing Rear Apron
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
- Some steps must be carried out automatically.
- Some of the repair illustrations show only one side of the vehicle.
- Unscrew fastening screw -1- in frame for light.
- Unscrew fastening screw -2- and remove guide pin -3- .
- Unscrew fastening screws -1- from wheel housing liner.
- Pull wheel cover aside -A- and unscrew fastening screws -1- at the sides of the rear apron -B- .
- Unscrew fastening screws -4- at the bottom of the rear apron.
- Unhook the rear apron at both sides.
- Press left wheel housing liner aside and release and disconnect the wire harness on the left side -a- .
- Unclip top of rear apron from the attachment strip.
- Remove rear apron with the help of another person.