LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 108319 Removing And Installing Engine Cover (Design Cover) (PANAMERA S E-Hybrid & PANAMERA S Hybrid) >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the engine cover (design cover) -1- evenly on the four clamps.
    Fig 1: Pull Off/Installing Engine Cover (Design Cover)
    G00541976
  2. Press the engine cover (design cover) onto the four clamps and two retaining pins (centre) one at a time.
  3. Check that the engine cover (design cover) is seated correctly.
scientia non olet · About LEMON Manuals