LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 103519 Removing And Installing Engine Mounting (Turbo) (PANAMERA Turbo, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive) >> Removing Engine Mounting >> Removing Left Engine Mount

Removing Left Engine Mount

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the four fastening screws on the heat shield -arrows-  for the final drive.
    Fig 1: Locating Screws On Heat Shield (Shows Removed Primary Catalytic Converter, But Left Primary Catalytic Converter Remains Fitted)
    G09804254Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Take out the heat shield. -arrow- 
    Fig 2: Removing Heat Shield
    G09804255Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Press against the engine mount from below -arrow-  and loosen the fastening nuts on the engine mount.
    Fig 3: Loosening Engine Mount (4WD Turbo Engine)
    G09804256Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove engine mount from the guide. -arrow- 
    Fig 4: Removing Engine Mount
    G09804257Courtesy of PORSCHE CARS NORTH AMERICA, INC.