LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 103519 Removing And Installing Engine Mounting (PANAMERA, PANAMERA S, PANAMERA 4, PANAMERA 4S, PANAMERA GTS, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Installing Engine Mounting >> Installing Engine Mounting At The Left And Right

Installing Engine Mounting At The Left And Right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The tightening specifications for the basic engine are stored centrally (→ 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS ).

Tightening torques and assembly instructions for other assemblies (e.g. chassis, electrics, transmission or body) or for peripheral engine equipment can be found in the corresponding documents.

  1. Guide engine mounting into the receptacle provided for it.
  2. Guide the engine mounting guide pin into the groove provided for it so that it can no longer pop out.
    Fig 1: Guiding Engine Mounting Guide Pin
    G09804234Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Press against the engine mounting from below and tighten the fastening nuts on the engine mounting.
scientia non olet · About LEMON Manuals