LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 103519 Removing And Installing Engine Mount (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Preliminary Work >> Installing Right Engine Mount

Installing Right Engine Mount

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS 

  1. Insert engine mount and tighten fastening screws -arrows-  .
  2. Slowly lower the engine and guide the threaded bolt into the engine support.
  3. Fig 1: Locating Mounting Point For Right Engine Mount
    G09804242Courtesy of PORSCHE CARS NORTH AMERICA, INC.