LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (46 - Brakes - Brake Mechanics -- PANAMERA (970)) >> WM 465002 Checking Front Brake Discs (Wear Assessment) (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA 4 Executive, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Checking >> Checking Front Brake Discs (Evaluating Cracks)

Checking Front Brake Discs (Evaluating Cracks)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Different vehicle types have different brake disc sizes. This produces differences for the maximum crack length limits.

The maximum crack length limit is calculated as follows:

0.5 x a (-a-  = width of friction surface in mm).

Fig 1: Identifying Width Of Friction Surface A
G09808000Courtesy of PORSCHE CARS NORTH AMERICA, INC.

The length of a crack can be measured with a steel rule, for example. → Brake discs 

Fig 2: Identifying Length On Brake Discs Cracks
G09808001Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Irrespective of the crack length, the brake disc must be replaced if the crack has extended as far as the outer and/or inner edge of the disc.

As a precaution, brake discs must be replaced when: