LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> 24 - Fuel System - Electronic Ignition >> WM 247019 Removing and installing DME control unit >> Installing DME control unit

Installing DME control unit

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws securing cover to fuse box housing. Tightening torque 3.5 Nm (2.5 ft lb.) 
  3. Tighten fastening screws securing filler neck to the body. Tightening torque 7 Nm (5 ft lb.) 
scientia non olet · About LEMON Manuals