Removing control unit for fuel pump

→ Remove the ignition key and switch off load before disconnecting or removing load.

1. Screw off fastening nuts -1 -  and remove control unit for fuel pump -2-  from the body.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Information 

   Always comply with the regulations for handling ESD-sensitive components!

   • Always wear approved work clothes and shoes when carrying out assembly work  .
   • Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation  .
   • Do not touch electric pins and plug contacts  .
2. Release electric plug connection -1-  (-a-  ) and disconnect it from the fuel pump control unit -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.