Installing turbocharger

Information 

Tightening torques, tightening sequence and assembly overviews for the engine and transmission:

• Group 1: → 1X00IN TECHNICAL VALUES
• Group 2: → 2X00IN TECHNICAL VALUES
• Group 3: → 3X00IN TECHNICAL VALUES

Information 

Replace sealing rings, seals and O-rings.

1. Installation is performed in reverse order. Pay particular attention to the following:
   1. 1.1. Replace O-rings and seals.
   2. 1.2. Replace nuts securing exhaust manifold/turbocharger to cylinder head.
   3. 1.3. Observe tightening sequence for exhaust manifold/turbocharger.
   4. 1.4. Install coolant and oil lines without tension.