LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging >> WM 213019 Removing and installing turbocharger >> Information >> Tightening specifications for exhaust manifold/turbocharger

Tightening specifications for exhaust manifold/turbocharger

Fig 1: Exhaust Manifold/Turbocharger Screws Tightening Sequence
G12833736
1-9  M8 nut → Initial tightening: → Initial tightening: 20 Nm (15 ft lb.) 
1-9  M8 nut → Final tightening: → Final tightening: 27 Nm (20 ft lb.) 

Tightening sequence 1 to 9 for both cylinder banks - always starting at the chain housing cover!

scientia non olet · About LEMON Manuals