LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - (95B) - MACAN >> WM 535555 Replacing Rear Side Section (All Models) >> Preparing Connection Areas Of The Body For Installation

Preparing Connection Areas Of The Body For Installation

  1. Align the sealing surface and connections of the body.
  2. De-burr connection points and prepare them for welding.

    Information 

    • Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive  .
    • The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
    • Do not begin bonding work until all materials and tools necessary for later repair work are available. 
  3. Prepare the marked areas for bonding and welding. → Preparing Bonding Surfaces
    Fig 1: Identifying Body Connection Areas
    G10030971Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Orange Bonding + resistance spot-welding
    Green Resistance spot-welding
    Blue Bonding
scientia non olet · About LEMON Manuals