LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - (95B) - MACAN >> WM 519219 Removing And Installing Cover For Front Underbody (All Models) >> Installing Cover For Front Underbody

Installing Cover For Front Underbody

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws for front underbody to Tightening torque 2.5 Nm (2 ftlb.)  until secure. Torque screwdriver Nr.89 Pos.5 
  2. Tighten fastening screws securing wheel housing liner to underbody panelling to Tightening torque 2 Nm (1.5 ftlb.)  until secure.
scientia non olet · About LEMON Manuals