LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 47 Brakes- Brake Hydraulic System, Regulator, Booster >> WM 474119 Removing and installing rear brake calliper >> Removing and installing rear brake calliper >> Removing rear brake calliper

Removing rear brake calliper

G12834765Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1  - Fastening screw for EPB actuator
2  - EPB actuator
3  - Sealing ring
4  - Fastening screw securing brake calliper to calliper carrier
5  - Boot for guide pin
6  - Fastening screw securing brake calliper to wheel bearing housing
7  - Calliper carrier
8  - Brake calliper
9  - Ventilation valve
10  - Dust boot
11  - Pad retaining bracket
12  - Brake pad
13  - Cable for brake pad wear indicator
14  - Cable holder for brake pad wear indicator
  1. Disconnect electric plug connection for brake pad wear indicator at the brake calliper.
  2. Release and disconnect electric plug connection -1-  on the speed sensor.
    G12834766Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Disconnect brake line -2-  at the brake calliper and collect brake fluid in a suitable container.
  4. Close off brake line using a suitable stopper.
  5. Unscrew fastening screws -3-  on the calliper carrier.
G12834767Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals