Technical values
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake calliper (18-inch - red/silver) to wheel carrier | M14 x 1.5 x 114 thread/always use new screws following removal | Initial tightening | 30 Nm (22 ft. lb.) | ||
| Brake calliper (18-inch - red/silver) to wheel carrier | M14 x 1.5 x 114 thread/always use new screws following removal | Final tightening | +90° | ||
| Brake calliper (17-inch - black) to wheel carrier | M14 x 1.5 x 48 thread/always use new screws following removal | Tightening torque | 196 Nm (145 ft. lb.) | ||
| Brake calliper (PCCB) to wheel carrier | M14 x 1.5 x 135 thread/always use new screws following removal | Initial tightening | 30 Nm (22 ft. lb.) | ||
| Brake calliper (PCCB) to wheel carrier | M14 x 1.5 x 135 thread/always use new screws following removal | Final tightening | +90° | ||
| Brake hose bracket to wheel carrier | M6 x 16 thread | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Brake hose to brake calliper (grey cast iron) | Tightening torque | 20 Nm (15 ft. lb.) | |||
| Brake hose to brake calliper (PCCB) | Tightening torque | 14 Nm (10.5 ft. lb.) |