LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 60 - Sliding Roof, Tilting Roof >> WM 604019 Removing and installing sliding-roof panel >> Installing roof assembly panels (panorama roof)

Installing roof assembly panels (panorama roof)

  1. Installation is performed in reverse order to removal.
  2. Adjust gap dimensions of front panel → 6X00IN41 GAP DIMENSIONS .
    1. 2.1. When positioning the panel, check that there is an equal gap between the panel and roof aperture. Align the panel in the longitudinal and transverse direction if necessary.
  3. Tighten roof assembly panel to Tightening torque 7 Nm (5 ft lb.)  .
scientia non olet · About LEMON Manuals