Removing cover for front seat
- On vehicles with heated seats:
Disconnect connector for seat heating.
- 1.1. Release electric plug connection for seat heating -1-
(- a-
) and disconnect it - A-
.
- 1.2. Release electric plug connection for seat heating for seat-surface extension -2-
(- b-
) and disconnect it - B-
.
- Remove fixing clip -1-
.
- Disengage the cover at the sides -2-
(- A-
).
- Unscrew fastening screws -3-
and pull the bracket -4-
down out of the catches - B-
.
- Disengage the cover at the sides - C-
.
- Disengage the cover at the front - D-
.
- On vehicles with seat-surface extension:
Disengage the cover on the seat-surface extension - E-
.
- Press in expansion rivet pin -5-
and pull out the expansion rivet.
- Disengage the cover at the rear - F-
.
- Disengage the cover at the sides - G-
.
- Disengage the cover at the rear - H-
.
- Pull the cover forward between the padding for the seat and backrest - I-
.
- On vehicles with seat-surface extension:
Disengage seat extension straps at both sides.
- 13.1. Lift up padding for rear seat.
- 13.2. Push back the bar -1-
on the cover - A-
.
- 13.3. Disengage strap for seat-surface extension -2-
and guide it through in a downward direction - B-
.
- Remove seat cover together with the padding from the seat frame.