LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 - Seat Frames >> WM 723819 Removing and installing control valve for air cushion >> Removing control valve for air cushion

Removing control valve for air cushion

  1. Release and pull off the pressure line (red) -1-  under the seat.
    G12890561
  2. Pull the pressure line (red) through between the backrest frame and seat.
  3. Release control valve pressure line (green) -3-  from the air cushion pressure line (green) -2-  and pull it off. Do not loosen tie-wraps -1-  .
    G12890562
  4. Unscrew two fastening screws from the backrest air cushion. → 721719 REMOVING AND INSTALLING AIR CUSHION FOR BACKREST - "REMOVING" 
  5. Release locking mechanisms -2-  on the control valve -1- (-A-)  and remove the control valve -B-  .
    G12890563
  6. Release pressure line (blue) -3-  from the control valve and pull it off.
    G12890564
  7. Release electric plug connection -4- (-a-)  and disconnect it -A-  .
scientia non olet · About LEMON Manuals