Installing front camera
Information
Always comply with the regulations for handling ESD-sensitive components!
- Always wear approved work clothes and shoes when carrying out assembly work .
- Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
- Do not touch electric pins and plug contacts .
Information
Do not touch the front camera lens!
- Connect electric plug connection -1-
on the front camera -2-
(-a-
) until it engages securely.
- Install front camera.
- 2.1. Position front camera -1- on the holder in such a way that the two retaining pins at the left -a- and the retaining pin at the right -b- make contact with the mounting points.
- 2.2. Press front camera forward into the mounting points until the locks -2- engage securely.