Removing light bulb igniter

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work  .
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation  .
• Do not touch electric pins and plug contacts  .

1. Unscrew fastening screws -1-  .
2. Carefully remove light bulb igniter -2-  from the headlight.
3. Release electric plug connection -1-  (-a-  ) and pull it off the light bulb igniter -2-  .
4. Pull electric plug connection -3-  off the light bulb igniter.