Replacing upper trailing-arm bearings

Information 

The following tools are required for replacing the bearing:

• Assembly fixture 3301 
• Assembly fixture T10230 

1. Clamp the trailing arm in a vice with aluminum protective jaws.
2. Press out the trailing-arm bearing.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   1	Spindle with nuts 3301/1
   2	Pressure piece 3301
   3	Pressure piece 3301/3
   4	Bearing
   5	Pressure piece T10230/13

   1. 2.1. Position special tools as shown in -illustration-  .
   2. 2.2. Press out bearing -4-  by turning the nut.

   Information 

   Do not use lubricant!

3. Press in trailing-arm bearing.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   1	Spindle with nuts 3301/1
   2	Pressure piece 3301
   3	Pressure piece 3301/3
   4	Bearing
   5	Pressure piece T10230/13

   1. 3.1. Position special tools as shown in -illustration-  .
   2. 3.2. Press out bearing -4-  by turning the nut.
   3. 3.3. Press in bearing -1-  so that -dimension A-  = -dimension B-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.