LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> 40 - Front Wheel Suspension, Drive Shafts >> WM 401519 Removing and installing upper trailing arm >> Removing and installing upper trailing arm >> Removing upper trailing arm

Removing upper trailing arm

  1. Lift the wheel bearing housing.
    G12834473Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Turn the wheel hub in such a way that a bore for a wheel bolt is at the top.
    2. 1.2. Support T10149  must be secured to the wheel hub with a wheel bolt
    3. 1.3. Support T10149  must now be fitted into the Transmission and Engine Jack WE 1599  .
    4. 1.4. Lift the wheel bearing housing.
  2. Separate threaded joint -1-  .

    Information 

    The slots in the wheel bearing housing must not be widened using a chisel or similar tool!

  3. Pull the two pins for the upper trailing arm -2-  out of the wheel bearing housing.

    Information 

    Do not lower the wheel bearing housing any lower than required.

  4. Unscrew nuts -3 and 6-  .
  5. Pull out screws -4 and 5-  .
  6. Remove upper trailing arm.
G10032902Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals