LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> 42 Rear Wheel Suspension, Drive Shaft >> WM 429119 Removing and installing rear connecting link (suspension/stabilizer) >> Removing and installing connecting link >> Installing connecting link

Installing connecting link

  1. Position connecting link -2-  on the removed anti-roll bar -3-. 
    G12888130Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw fastening screw -1-  into the nut, but do not tighten it, so that the connecting link -2-  can still move.
scientia non olet · About LEMON Manuals