LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> 42 Rear Wheel Suspension, Drive Shaft >> WM 422119 Removing and installing rear drive shaft >> Removing and installing rear drive shaft >> Removing rear drive shaft

Removing rear drive shaft

Information 

Drive shafts must not be left hanging from the joint stop! Hold the drive shaft or tie it up if necessary.

  1. Tilt wheel bearing housing -1-  down slightly. A second mechanic must guide the drive shaft -2-  carefully out of the wheel bearing housing.
    G12888044Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Lever out the drive shaft -1-  using a suitable tool (e.g using 2 mounting levers) and carefully remove it from the rear-axle transmission housing.

    Information 

    Hold the drive shaft!  In the event of unfavorable tolerances, the drive shaft might slip out.

    G12888045Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals