LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Axle Shafts >> 42 Rear Wheel Suspension, Drive Shaft >> WM 420919 Removing and installing rear tie rod >> Removing and installing rear tie rod >> Removing tie rod

Removing tie rod

G12888016Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Mark the position of the toe eccentric adjuster with respect to the chassis subframe for re-installation.
  2. Unscrew fastening screws -1-  for the tie rod -2-  at the chassis subframe (eccentric screw) and at the wheel bearing housing.
    1. 2.1. Use interchangeable head T40183  for fastening screw on the chassis subframe.
  3. Remove tie rod.
scientia non olet · About LEMON Manuals