LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 55 - Lids, Flaps >> WM 559419 Removing and installing rear lid seal >> Installing rear lid seal

Installing rear lid seal

  1. Place rear lid seal in installation position.
    G12834931Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Position marking on the seal -2-  at the center of the vehicle.
    2. 1.2. Fit seal with the vent holes facing outwards on the sheetmetal flange.
  2. Press rear lid seal -1-  onto the sheetmetal flange.
  3. Check that the seal is fitted securely and is flush, especially in the rounded areas.
scientia non olet · About LEMON Manuals