LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 55 - Lids, Flaps >> WM 558719 Removing and installing upper part of rear lid lock >> Technical values

Technical values

TORQUE SPECIFICATION

Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screw for upper part of lid lock   Tightening torque 8 Nm (6 ft. lb.) Torque angle 45°  
G12834891Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals