LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 55 - Lids, Flaps >> WM 558719 Removing and installing upper part of rear lid lock >> Installing upper part of rear lid lock

Installing upper part of rear lid lock

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws to Tightening torque 8 Nm (6 ft lb.) Torque angle 45°  until secure.
scientia non olet · About LEMON Manuals