LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 55 - Lids, Flaps >> WM 557319 Removing and installing actuating cylinder for rear lid >> Function test on rear pneumatic springs

Function test on rear pneumatic springs

  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The two fitted pneumatic springs must hold the lid open.
  3. Close the lid.
scientia non olet · About LEMON Manuals