LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 55 - Lids, Flaps >> WM 555719 Removing and installing rear lid release >> Removing rear lid release

Removing rear lid release

  1. Release and disconnect electric plug connection.
  2. Remove rear lid release  .
    G12834869Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. At the outer edge of the release switch, insert a plastic wedge no deeper than 2.5 mm  between the release switch -1-  and rear window -2-  as shown - A-  .
    2. 2.2. Push the plastic wedge straight down and unclip the release switch from the retainer plate - B-  .

      Do not use force on the retainer plate.

scientia non olet · About LEMON Manuals