Removing control unit for memory seat adjustment

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work.
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
• Do not touch electric pins and plug contacts.

1. Release clip -1-  (-a-  ), swivel it aside -b-  and remove electric plug connection from the control unit for memory seat adjustment -2-  .
2. Release electric plug connection -3-  (-c-  ) and pull it off the control unit for memory seat adjustment.
3. Release electric plug connection -1-  (-a-  ) and pull it off the control unit for memory seat adjustment -2-  .
4. Disengage control unit for memory seat adjustment -1-  by moving it forward out of the holder -2-  and remove it.