Removing motor for seat adjustment
- Push out locking mechanism for cover for motor -2-
from the rear and unclip cover for motor -1-
(-A-
).
- Disconnect electric plug connection -3- at the motor -B- .
- Unscrew two fastening screws -4-
.
- Unclip fixing clip -5-
for the long drive shaft -6-
(-C-
).
- Carefully bend the long drive shaft -6- (-D- ) and pull it off the motor -1- (-E- ).
- Unclip the motor -1-
from the seat frame -7-
(-F-
) and pull it off the short drive shaft -8-
(-G-
).