Installing control valve for air cushion
- Connect the pressure line (blue) -3-
to the control valve.
- Insert electric plug connection -4-
(-A-
) until the connector engages securely.
- Fit the control valve -1- (-A-
) and engage it in the locking mechanisms -2-
.
- Screw in two fastening screws for the backrest air cushion. → 721719 REMOVING AND INSTALLING AIR CUSHION FOR BACKREST - "INSTALLING"
- Connect control valve pressure line (green) -3-
to the air cushion pressure line (green) -2-
.
- Pull the pressure line (red) through between the backrest frame and seat.
- Fit the pressure line (red) -1-
under the seat.