Removing lower part of B-pillar trim panel

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Unclip front inner door sill trim in the rear area at the body.
2. Unclip trim panel -1-  in the upper area on the B-pillar.
3. Unclip and remove trim panel -1-  at the bottom at the side member.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.