LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> 68 - Interior Equipment >> WM 681619 Removing and installing oddments tray >> Technical values

Technical values

TORQUE SPECIFICATION

Location Description Type Basic value Tolerance 1 Tolerance 2
Centre console to selector support   Tightening torque 8 Nm (6 ft lb.)    
Centre console to cardan tunnel   Tightening torque 20 Nm (15 ft lb.)    
scientia non olet · About LEMON Manuals