Removing C-pillar cover

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Unscrew screw -1-  .
2. Loosen rubber seal -2-  on the cover.
3. Unscrew screws -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

4. Slide the cover -1-  down slightly -arrow A-  , detach it from the door and then guide it up and out -arrow B-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.