Removing rear-view mirror

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Disconnect electric plug connections -1-  .
2. Guide rubber seal -2-  out of the door inner panel.
3. Pull off adhesive pad -3-  .
4. Hold rear-view mirror -4-  securely and unscrew screw -5-  .
5. Remove rear-view mirror -4-  and guide wire harness -6-  out of the door.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.