Removing mirror glass

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment.
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant.
• Some steps must be carried out automatically.
• Some of the repair illustrations show only one side of the vehicle.

1. Press mirror glass -1-  inwards on the inside -A-  and carefully unclip it from the adjustment mechanism on the outside -B-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Unclip plug connection -2-  from the bracket -3-  .
3. Release and disconnect plug connection -2-  .
4. Release and disconnect plug connections -4-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.