Removing rear panel

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment  .
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant  .
• Some steps must be carried out automatically  .
• Some of the repair illustrations show only one side of the vehicle  .

1. Unscrew fastening screws -1-  .
2. Release expansion rivets -2, 4-  and remove them.
3. Guide side tabs out of rear apron.
4. Unclip and remove rear panel -3-  on rear apron.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.