LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers >> WM 633319 Removing and installing front carrier >> Installing front carrier

Installing front carrier

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws to the specified torque. Tightening torque 55 Nm (41 ft lb.) 
  2. Tighten fastening screws to the specified torque. Tightening torque 4.5 Nm (3.25 ft lb.) 
scientia non olet · About LEMON Manuals