Removing front retaining strip

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment  .
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant  .
• Some steps must be carried out automatically  .
• Some of the repair illustrations show only one side of the vehicle  .

1. Lift up rubber headlight seal -1 -  at the front.
2. Unscrew fastening screws -2, 3 -  .
3. Lift front headlight up slightly, carefully guide out retaining strip -4-  close to the headlight and remove it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.