LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps >> WM 559319 Removing and installing rear pneumatic spring >> Function test on rear pneumatic spring

Function test on rear pneumatic spring

  1. Close and open the lid several times to check that the pneumatic springs are working properly and were fitted correctly.
  2. Open the lid fully. The two fitted pneumatic springs must hold the lid open.
  3. Close the lid.
scientia non olet · About LEMON Manuals