LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps >> WM 559119 Removing and installing rear lid hinge >> Installing rear lid hinge

Installing rear lid hinge

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screw for lid hinge to Tightening torque 10 Nm (7.5 ft lb.)  until secure.
  3. Tighten fastening nut for lid hinge to Tightening torque 23 Nm (17 ft lb.)  until secure.
scientia non olet · About LEMON Manuals