Removing filler flap: Notes
Information
The filler flap (module) will be damaged during removal and must be replaced during installation.
- Open the filler flap.
- Remove filler flap.
- 2.1. Insert a screwdriver into the cut-out - A- and disengage the catch -2- .
- 2.2. Detach filler flap -1- by pulling it - B- out of the catch.
- Open the fuel tank cap - A-
, unclip the retaining strap -1-
and pull it off - B-
.
- Open luggage compartment trim at the right.
- Unhook emergency release button -1-
.
- Guide out operating cable.
- Unscrew fastening screw -1-
for filler flap actuator.
- Use a screwdriver to puncture all depressions and release the catches.
- Use special tool hook 3370
to pull out the filler flap housing -A-
.
- Release electric plug connection and disconnect connector.
- Guide new filler flap housing into the opening in the body.
- Guide emergency release cable in through the bodyshell.
- Connect electric plug connection.
- Guide emergency release cable through the bodyshell and engage it at the release button.
- Align the filler flap housing so that the rubber lip goes all around the outside of the filler flap housing.
- Press the filler flap housing against the body until the locking lugs engage securely.
- Slide on the tank cap so that the retaining lugs -1-
lock into the holders and engage with an audible click in the catch -2-
.
- Clip in retaining strap -1-
(-A-
).
- Screw in fuel tank cap - B- .