Disconnecting optical waveguide (PCM to TV tuner)

Information 

Observe the general information on optical waveguides. → General information on optical waveguides - MOST bus 

Information 

Before routing a new optical waveguide:

• Visually check the locks, connector housing and contacts for damage  .
• Replace damaged parts if necessary  .

1. Release electric plug connection -1-  for optical waveguide at the compact connector -2-  for the PCM display and operator control unit -B-  and disconnect it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Release electric plug connection -1-  for optical waveguide at the compact connector -2-  for the TV tuner and disconnect it -B-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.