Removing wire harness for number plate lights

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component  .
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Disconnect electric plug connections -1-  at the reversing lights -2-  .
   1. 1.1. Cut tie-wrap -3-  .
   2. 1.2. Release and disconnect electric plug connection.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Remove wire harness for number plate lights -1-  from holders -2-  .
3. Release electric plug connections at the number plate lights -3-  and disconnect them.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

4. Pull all holders -1-  for the wire harness for number plate lights -2-  off the rear apron and remove wire harness for number plate lights.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.