Installing wiring for backrest

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1	Two connectors for backrest wire harness
2	Connector for motor for air cushion 3 - Connector for control valve for air cushion 4 - Two connectors for lumbar support
5	Connector for motor for backrest adjustment
6	Connector for motor for seat ventilation

First fit the wire harness loosely in the backrest, ensuring that it is positioned correctly.
Clip in clips -1- on the backrest frame.
Fit tie-wraps -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Plug in electric plug connections -1- to -6- until the connectors engage securely.
Screw in two fastening screws for the backrest air cushion. → 721719 REMOVING AND INSTALLING AIR CUSHION FOR BACKREST