Installing wire harness for tailgate at the left
- Installation is performed in reverse order to removal.
- 1.1. Do not twist or entangle the individual strands of the wire harness for tailgate at the left.
- 1.2. Check that the wire harness is routed correctly and without tension so that no chafing occurs.
- 1.3. Connect all electric plug connections until they engage securely.
- 1.4. Lock all electric plug connections by hand using the manual slide lock.
- 1.5. Tighten fastening nut for the ground strap at the roof pillar. Tightening torque 9 Nm (6.5 ft. lb.)